Use and Care Manual

31
Avalon 6 Burner Gas Grill
Using the Rotisserie Burner
The rear infrared rotisserie burner allows for slow rotisserie
cooking of meats & poultry. The infrared rotisserie burner
radiates heat onto the outer surface of the food and allows
cooking without grease dripping on the hot burners. Rotisserie
cooking generally requires 1
1/2
to 4
1/2
hours to cook depending
on the size and type of meat being cooked.
The rotisserie burner is designed only to be used for rotisserie
cooking with the compatible rotisserie kit accessory which is
sold separately and available from your local dealer.
Remove cooking grates and heat tents to provide adequate
space for food to turn. Always place a large basting pan
underneath the rotisserie food to catch grease and drippings
and to prevent them from clogging up the main burners. The
basting pan can be set directly on top of the main burners.
Note: Because there is some distance between the gas valve
and the rotisserie burner, lighting the rotisserie burner may take
several attempts to ignite the burner.
1. Turn all gas control knobs to the OFF position.
2. Turn on gas valve from gas source.
3. Lid MUST be open when lighting.
4. Remove warming rack.
7. To extinguish the burner, push in the control knob and turn
clockwise to the OFF position.
IMPORTANT
Please read these instructions before attempting to light the
grill.
Warming rack must be removed when
operating the rotisserie burner.
Failure to open the lid before igniting may
result in an explosive flare-up, which can
cause serious bodily injury or death.
Failure to follow the five-minute waiting period
may result in an explosive flare-up, which can
cause serious bodily injury or death.
DO NOT lean over the open grill
when lighting.
Note: Match lighting tool is located on the inside of the door.
1. Turn all gas control knobs to the OFF position.
2. Turn on gas valve from gas source
3. Lid MUST be open when lighting.
4. Remove warming rack.
5. Remove the match lighting tool and stick a match into the
end of the tool.
6. Light the match.
7. Once lit, guide the lit match to the front of the infrared
rotisserie burner.
8. Push in and turn the rotisserie bunrer control knob to Max.
9. Adjust burner control knob to the desired cooking
temperature.
Match Lighting
Basting pan
5. Push in and slowly turn the rotisserie burner knob to the
Max position.Push and hold the electronic igniter button.
6. If the burner does NOT ignite within 5 attempts, turn the
burner control knob to the OFF position, wait at least
five minutes for the gas to clear and repeat this lighting
procedure.