User manual

User Tools
131
6
System settings
Menu Description
Panel Tone The beeper (key tone) sounds when a key is pressed. This
beeper can be turned on or off.
Note
❒
Default:
On
Ready/Tone Choose whether the machine beeps when it becomes
ready for a copy run after power up.
Note
❒
Default:
On
❒
When the “Panel Tone” is set to Off, the beeper does
not sound even if the “Ready/Tone” is set to On.
Copy Count Display The copy counter can be set to show the number of cop-
ies made (Count Up), or the number of copies remaining
to be made (Count Down).
Note
❒
Default:
Count Up
System Reset You can set the reset time of the machine.
After a copy job in Interrupt or Sort/Stack/Staple mode
is completed, the mode will not be reset if there is still pa-
per in the sorter or originals in the document feeder. A
print job cannot be started in this condition. When the
system is reset by this user tool, the machine can start
printing.
You can set this reset time from 10 to 990 seconds (in 10
seconds steps) or off.
A
Select
[
On
]
or
[
Off
]
with the
<>
keys.
B
When you select
[
On
]
, enter the system reset time with
the number keys. Then press the
[
OK
]
key.
Note
❒
Default:
On (60 seconds)