User manual

Changing the Machine's Settings
132
6
Function Reset You can set the function switching time when "Interleave
Print" is Off.
When a print job comes while the machine is copying, af-
ter finishing the copy job the machine will wait for a
specified time before starting the print job.
You can set this time from 10 to 990 seconds (in 10 sec-
onds steps) or off.
A
Select
[
On
]
or
[
Off
]
with the
<>
keys.
B
When you select
[
On
]
, enter the time with the number
keys. Then press the
[
OK
]
key.
Note
❒
Default:
On (60 seconds)
Reference
For more about "Interleave Print",
⇒
P.131
“System
settings”
.
Control Panel Off The machine enters Energy Saver mode automatically
after your job is finished, after the selected time. The time
can be set from 10 to 990 seconds (in 10 seconds steps), or
off. In Energy Saver mode, the panel display turns off.
A
Select
[
On
]
or
[
Off
]
with the
<>
keys.
B
When you select
[
On
]
, enter the time with the number
keys. Then press the
[
OK
]
key.
Note
❒
Default:
On (60 seconds)
Auto Timer The machine turns itself off automatically to conserve
energy after your job is finished, after the selected time.
This function called “Auto Off”. The time can be set from
1 to 240 minutes.
Note
❒
Default:
60 minutes
Tray Paper Size Select the size of the copy paper set in the paper tray.
Note
❒
If the specified paper size differs from the size of pa-
per actually set in the paper tray, a paper misfeed
might occur because the paper size is not detected
correctly.
Reference
For details,
⇒
P.127
“To Adjust the Paper Size with the
User Tools”
.
Menu Description