User manual

User Tools
135
6
Settings You Can Change with the User Tools (Copy Features)
Reference
For how to access the user tools, ⇒ P.129
“Accessing the User Tools”
.
Ctr. Panel Off Level The machine enters Energy Saver mode automatically
after your job is finished.
Three Energy Saver levels are available.
•Level 1
Power Consumption: Approximately A xx % de-
crease compared to stand-by.
Warm-up time: Approximately xx seconds
•Level 2
Power Consumption: Approximately A xx % de-
crease compared to stand-by.
Warm-up time: Approximately xx seconds
•Level 3
Power Consumption: Approximately A xx % de-
crease compared to stand-by.
Warm-up time: Approximately xx seconds
Note
❒
Default:
Level 1
Key Operator Tools
Use these tools to manage use of the machine.
Note
❒
Enter a previously registered key operator code with the number keys.
❒
For details about key operator code,
⇒
P.131
“System settings”
.
Key Op. Access If you select On, only operators who know the key oper-
ator code can access the “Key Operator Tools” in the Sys-
tem Settings and Copy Features.
Note
❒
Default:
Off
❒
If you select On, you should register the key operator
code.
Program KeyOpCode Use to register or change the key operator code (up to 8
digits).
AOF (Keep it on.)
Note
❒
For details about this function, contact your service
representative.
Menu Description