User manual
Basics
14
1
Starting the Machine
A Press the operation switch to make the On indicator go on.
Note
❒
If the power is not turned on when the operation switch is pressed, check
if the main power switch is on. If off, turn it on.
❒
During the warm-up period (about 7 minutes), you can use the Auto Start
function. ⇒ P.53
“Auto Start”
.
When the machine is set for user codes
A Enter your user code using the number keys. Then press the
{
#
}
key.
Note
❒
To prevent others from making copies with your user code, press the
{
Clear
Modes
}
key and the
{
Clear/Stop
}
key simultaneously after copying.
Reference
For more about user codes ⇒ P.136
“General features”
.
When the Energy Saver indicator is lit
The machine is in Energy Saver mode.
A Press any key.
The machine will return to the ready condition.
Note
❒
The machine will also return to the ready condition when an original is set
in the document feeder, or when the platen cover or the document feeder
is opened.