User manual

Basics

Setting Non-standard Size Originals

When copying from non-standard size originals, enter the original size so that

copy is well aligned.

Limitation

❒

You must set your non-standard size originals on the exposure glass.

Reference

For the standard sizes the machine can detect, ⇒ P.16

“Standard Size Origi-

nals”

Note

❒

The dimensions you can enter must be within the following ranges:

A Select the copy paper size.

B Press the

{

}

key.

C Make sure that the

[

Custom Size Orig.

]

is selected, then press the

[

Select

]

key.

Vertical size 50 - 297mm (in 1mm steps), 2.0" - 11.7" (in 0.1" steps)

Horizontal size 50 - 432mm (in 1mm steps), 2.0" - 17" (in 0.1" steps)