User manual
Copying
44
2
E Press the
[
OK
]
key.
F Adjust the paper guides to the paper size.
1. Horizontal size
2. Vertical size
3. Extender
4. Paper guides
Note
❒
Make sure the paper size and direction in the bypass tray is displayed on
the operation panel.
❒
Make sure that the paper guides match the paper size. If the paper guides
are not adjusted to the paper size properly, paper might be skewed or pa-
per misfeed might occur.
❒
With large copy paper (more than A4
L
, 8
1
/
2
" × 11"
L
), swing out the ex-
tender.
G With the side you wish to copy onto face up, insert the paper into the by-
pass tray until it stops.
H Set your originals, then press the
{
Start
}
key.
Copying onto non-standard size paper with the bypass tray
Preparation
You can register non-standard paper sizes you use often in keys
[
Custom1
]
,
[
Custom2
]
, and
[
Custom3
]
with the user tools. ⇒ P.131
“System settings”
.
Note
❒
Be sure to set the paper size or a paper misfeed might occur.
A Open the baypass tray.