User manual

Basic Procedure
53
2
A Press the
{
Interrupt
}
key. The machine will stop the copy run and store the
present settings in memory before returning to the ready condition.
B Remove the previous originals. Set your originals for interrupt copying on
the exposure glass or in the document feeder.
C Make your copies.
D After interrupt copying is completed, press the
{
Interrupt
}
key again. The
machine will recall the previous copy settings.
E Reset the previous originals and press the
{
Start
}
key to resume the previ-
ous run.
Auto Start
If you press the
{
Start
}
key during the warm-up period, the
{
Start
}
key will blink
and the machine will start copying after the warm-up period.
A Set your copy settings during the warm-up period.
B Press the
{
Start
}
key.
Note
❒
To cancel Auto Start, press the
{
Clear/Stop
}
key.