User manual
Copying
68
2
C Press the
[
Exit
]
key.
D Select the copy paper size.
E Set your originals, then press the
{
Start
}
key.
Margin Adjustment
You can make a margin by shifting the image to the left or right. This function is
convenient when you want to bind copies.
Note
❒
You can change the width of the binding margin as follows.
❒
The margin width default is as follows. You can change this default setting
with the user tools. ⇒ P.136
“General features”
.
❒
If you set too wide a margin, areas you do not want to delete might be erased.
Reference
Regarding function that cannot be used together with this function, ⇒ P.103
“Combination Chart”
.
Metric Version 0 - 20mm (in 1mm steps)
Inch Version 0" - 0.8" (in 0.1" steps)
Metric Version 10mm Left
Inch Version 0.4" Left