User's Manual

3: Operations

You may enter commands in any combination of uppercase and lowercase. You

must enter all command characters correctly; there are no command abbreviations.

There are two types of commands: operations and administration. A user must have

administrative privileges to use the administration commands. The following tables

list and briefly describe each command.

Table 3-2. Operations Command Summary

Command Description

On Turns one or more outlets on

Off Turns one or more outlets off

Reboot Reboots one or more outlets

Status Displays the on/off status of one or more outlets

ILoad Displays the total cumulative input load

IStat Displays the status of the infeed

Connect Connect to the serial port

Logout Ends a session

Password Changes the password for the current user

Quit Ends a session

List Outlets Lists all accessible outlets for the current user

List Ports Lists all accessible serial/Pass-Thru ports for the current user

List Group Lists all assigned outlets for a group name

List Groups Lists all accessible groups for the current user

Table 3-3. Administrative Command Summary

Command Description

Add Grouptouser Grants a user access to one or more groups

Add Outlettogroup Adds an outlet to a group name

Add Outlettouser Grants a user access to one or all outlets

Add Portuser Grants a user access to one or all serial/Pass-Thru ports

Create Group Adds a group name

Create User Adds a user account

Delete Groupfromuser Removes access to one or more groups for a user

Delete Outletfromgroup Deletes an outlet from a group name

Delete Outletfromuser Removes access to one or all outlets for a user

Delete Portfromuser Removes access to one or all serial/Pass-Thru ports

List User Displays all accessible outlets/groups for a user

List Users Displays privilege levels for all users

Remove Group Deletes a group name

Remove User Deletes a user account

Restart Performs a warm boot

Set Banner Set the pre-login banner text

Set DHCP Enables or disables DHCP support

Set DNS Sets the IP address of the Domain Name server

Set FTP Autoupdate Enables or disables automatic FTP update support

Set FTP Autoupdate

Day

Sets the automatic FTP update day

SecureLinx SLP Remote Power Manager 34