User's Manual

5: Commands and Levels
EDS-MD Command Reference 265
<text> = IP address.
remote port <number>
Sets the remote port used to connect to the host.
<number> = port to be used.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
ssh username <text>
Sets the username for logging into the host via SSH.
<text> = username.
write
Stores the current configuration in permanent memory.
host 8 (tunnel-connect-host:8:8) level commands
address <text>
Sets the remote host to establish tunneling connections with.
<text> = IP address or host name of the remote host.
aes decrypt key <hexadecimal>
Sets the connect tunnel AES decrypt key with up to 16 bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punctua-
tion:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains spaces.
aes decrypt key text <text>
Sets the connect tunnel AES decrypt key with up to 16 bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains spaces.
aes encrypt key <hexadecimal>
Sets the connect tunnel AES encrypt key with up to 16 bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punctua-
tion:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains spaces.
aes encrypt key text <text>
Sets the connect tunnel AES encrypt key with up to 16 bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains spaces.
auto show statistics
show connection statistics
clrscrn
Clears the screen.
credentials <text>
Selects the RSA/DSA certificates by name for the SSL client.
default protocol
Restores the default protocol as "TCP".
default tcp keep alive
Restores the default 45 second connect mode TCP keep alive
timeout.
exit
Exits to the next higher level.
no address
Removes the remote host address used to establish tunneling
connections.
no aes decrypt key
Removes the connect tunnel AES decrypt key.
no aes encrypt key
Removes the connect tunnel AES encrypt key.
no credentials
Clears the RSA/DSA certificate selection.
no port
Removes the remote port used to establish tunnel connections.
no ssh username
Removes the SSH user name.
no tcp keep alive
Disables the connect mode TCP keep alive timeout.
no vip name
Removes the VIP name.
port <number>
Sets the remote port to use for connect mode tunneling.
<number> = number of the port to use.
protocol ssh
Uses SSH protocol for connect mode tunneling.
protocol ssl
Uses SSL protocol for connect mode tunneling.