User's Manual

5: Commands and Levels
EDS-MD Command Reference 318
write
Stores the current configuration in permanent memory.
password (tunnel-accept-password:5) level commands
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no password
Removes the password so connections will be accepted unchal-
lenged.
password <text>
Sets the password required on the network side of the tunnel
to begin
a connection.
prompt disable
Inhibits any prompting for password on the network side of the
tunnel.
prompt enable
Sets up so a user on the network side of the tunnel will be
prompted for
a password.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
password (tunnel-accept-password:4) level commands
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no password
Removes the password so connections will be accepted unchal-
lenged.
password <text>
Sets the password required on the network side of the tunnel
to begin
a connection.
prompt disable
Inhibits any prompting for password on the network side of the
tunnel.
prompt enable
Sets up so a user on the network side of the tunnel will be
prompted for
a password.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
password (tunnel-accept-password:3) level commands
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no password
Removes the password so connections will be accepted unchal-
lenged.
password <text>
Sets the password required on the network side of the tunnel
to begin
a connection.
prompt disable
Inhibits any prompting for password on the network side of the
tunnel.
prompt enable
Sets up so a user on the network side of the tunnel will be
prompted for
a password.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current CLI