User's Manual

5: Commands and Levels
EDS-MD Command Reference 333
line <line>
Enters the line level.
<line> = number of the line (serial port) to be configured.
login connect menu disable
Disables the login connect menu, so a user will get the CLI im-
mediately
after logging in.
login connect menu enable
Enables the login connect menu, so a user will get the menu
rather than the
CLI immediately after logging in.
no send break
Removes the configured send break character.
preview connect menu
Shows the layout of the connect menu with current settings.
send break <control>
Sets the optional send break character.
<text> = the character.
The character may be input as text, control, decimal, or hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
terminal <line>
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be confi-
gured.
terminal network
Enters the configure-terminal level for the network.
terminal type <text>
Sets the terminal type.
tunnel <line>
Enters the tunnel level.
<line> = number of the tunnel line (serial port) to be confi-
gured.
write
Stores the current configuration in permanent memory.
trusted authorities (ssl-auth) level commands
add
Adds an Authority Certificate.
clrscrn
Clears the screen.
exit
Exits to the ssl level.
no intermediate authority <cert>
Removes an Intermediate Authority Certificate.
<cert> = index displayed by "show authority" command.
no trusted authority <cert>
Removes a Trusted Authority Certificate.
<cert> = index displayed by "show authority" command.
show
Displays Authority Certificate Information.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
tunnel 1 (tunnel:1) level commands
accept
Enters the accept level for this tunnel.
auto show statistics
show connection statistics
clear counters
Zeros all tunnel counters
clrscrn
Clears the screen.
connect
Enters the connect level for this tunnel.
disconnect
Enters the disconnect level for this tunnel.
exit
Exits to the enable level.
line <line>
Enters the line level.
<line> = number of the line (serial port) to be configured.