user manual

5: Commands and Levels
PremierWave XN Command Reference 59
flush stop character disable
Forwards the stop character from the Line to the network.
flush stop character enable
Prevents the stop character from the Line from being for-
warded to the network.
modem control disable
Does not watch the modem control pin to disconnect.
modem control enable
Watches the modem control pin and disconnects if it is not
asserted.
no stop character
Removes the stop character.
no timeout Disables disconnect after timeout feature for tunneling
sessions.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
stop character <control>
Sets the stop character.
The character may be input as text, control, decimal, or
hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
timeout <milliseconds>
Disconnects when no data has been received on the line
(serial port) for the
specified length of time.
<milliseconds> = timeout in milliseconds.
write
Stores the current configuration in permanent memory.
dns (dns) level commands
clrscrn
Clears the screen.
exit
Exits to the enable level.
lookup <host_or_ip>
Return a lookup on the DNS name or IP address.
show
Show DNS status.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
email 1 (email:1) level commands
auto show statistics
Continuously displays email statistics.
cc <text>
Sets Cc addresses for email alerts.
<text> = a quoted, semicolon separated list of email ad-
dresses.
clear log
Clears all entries from the mail log.
clear mail counters
Sets the email counters to zero.
clrscrn
Clears the screen.
default local port
Sets the local port (used to send email alerts) to random.
default priority
Sets X-Priority for email alerts to 3 (normal).
default server port Restores the factory default port for SMTP on the server
side.
email <number>
Enters the configure email level.
exit
Exits to the enable level.
from
<text>
Sets the From address for email alerts.
<text> = email address to place in the From field of the
email alert.
local port
<number>
Sets the local port used to send email alerts.
<number> local port to use for email alerts.
message file <text>
Specifies a text file, the contents of which will be the mes-
sage body
of an email alert.