Lanzar 5.6 TFT LCD COLOR MONITOR + SEL POWER AV PHONE www.lanzar.
Installation Guide: 1.Slide monitor into dash mount S2 and then use fastener to tighten(Optional) 2.Firmly attach dash mount on a flat surface and adjust viewing angle of monitor by tightening the fastener at the side A.When you install the monitor into the seat head cushion make sure that the monitor connecting cable assembly has already been pull through by the supporting pipe. B.Before connecting the monitor, pull the connecting cable assembly through the headrest shroud as shown in diagram2. C.
Maintenance To avoid electrical shock ,do not open the enclosure. high voltage is present. No user serviceable parts inside the enclosure D.Connect the connecting cable assembly to the monitor. E.Ensure there is no foreign material is trapped inside the enclosure, before pushing the monitor into the headrest shroud make sure that the monitor is securely locked in place. C E Do not use any chemical solvent, cleaning agent or corrosive detergent to clean away dirt on the surface of the screen.
3) Basic Operating instructions Remote Control Operating Instruction: 1.mute 2.sleep 3. contrast control+ 4. brightness control5. contrast control6. brightness control+ 7.Hue control+ 8. volume control+ 9. Hue control10. volume control11. video1/video2 12. power on/off 13. color control+ 14. color control15. mode:16:9/4:3 16.prference 17.system 1 2 3 4 5 6 7 8 9 10 SLEEP 11 AV 12 1 13 14 MODE 15 PP 16 SYS 17 1.SEL+ 2. SELCT 3.SEL4. POWER ON/OFF 5. AUDIO/VIDEO SWITCH 6.
