Installation & Assembly

Page 4
Page 5
MASSAGE
INTENSITY
HEAT
UP
D
O
W
N
LO
HIGH
MED
WAVE
PULSE
STDY
LOCK
UNLOCK
HEAT (On/Off)
UP (Lift Chair)
LOCKED (LED)
DOWN (Lower Chair)
MASSAGE (On/Off)
(Change Setting)
INTENSITY
(Change Setting)
UNLOCKED (LED)
MASSAGE SETTINGS
(LEDs)
INTENSITY SETTINGS
(LEDs)
Sitting in your lift chair
Press and hold the UP button to raise your lift chair to the standing position.
Back into the lift chair and sit in the center of the seat, using the armrests for
support if needed.
Press the DOWN button to lower the lift chair to a comfortable seated position.
Reclining the lift chair
Press and hold the DOWN button until comfortably reclined.
Press and hold the UP button to return to an upright position. Release the button
when the lift chair reaches a comfortable seated position.
Standing from your lift chair.
Press and hold the UP button to raise your lift chair.
Release the button when the lift chair reaches a height where you can stand
up comfortably.
How to lock and unlock the chair functions
Press and hold the LOCK button for approximately 3 seconds to lock the hand
control. The RED LED to the right of the button will light up to indicate the hand
control has been locked.
Press and hold the LOCK button for approximately 6 second to unlock the hand
control. The GREEN LED to the left of the button will light up to indicate the hand
control has been unlocked.
OPERATING YOUR LIFT CHAIR
FABRIC CARE INSTRUCTIONS
CORD AND TRANSFORMER CONNECTIONS
Connect the massage unit from the back to
the plug marked BACK.
Connect the heat unit from the back to the
plug marked HEAT.
BACK
HEAT
The transformer and the power cable are in
a foam bag located on top of the chair.
Connect to the plug coming from the seat.
Transformer
and cable