Specification Sheet

Page: 1
Larson Electronics LLC www.LarsonElectronics.com
9419 E US HWY 175, Kemp, TX 75143 Phone: [phone] Fax: [phone] Email: [e-mail]
Class 1 Division 2 Fluorescent Light for Corrosion Resistant Requirements - Neoprene Gasket
Part #: HALP-48-2L-NSIL
Made in the USA
The Larson Electronics HALP-48-2L-NSIL Hazardous Area Fluorescent Light Fixture is U.S./Canada U.L. approved Class 1 Division 2
Groups A, B, C and D - UL 1598A listed, has a T4C temperature rating and is specifically designed to handle the rigors of wet and
corrosive marine environments.
The HALP-48-2L-NSIL hazardous area fluorescent light fixture is designed for use in wet areas and saltwater-marine environments where
corrosion resistance is critical to equipment longevity and safety. This Class 1 Division 2 rated fixture is constructed of non-corrosive materials
including a polyester housing reinforced with glass fiber, a poured in neoprene gasket (non-silicone) for reliable sealing and an impact resistant
acrylic diffuser. Eight corrosion resistant plastic latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to
prevent drips and water intrusion. Optional stainless steel latches available upon request.
This fixture is UL 844 rated and Class 1 Division II, Groups A, B, C, D approved. The HALP-48-2L-NSIL also carries a UL 1598A outdoor marine
rating and meets US Coast Guard specifications.