Installation Manual

Larson Electronics LLC www.LarsonElectronics.com [e-mail]
9419 E US HWY 175, Kemp, TX 75143 - P: [phone] - F: [phone]
MAINTENANCE
All maintenance procedures are to be performed only when the atmosphere surrounding the fixture is
non-hazardous.
1. Visually inspect the Red LED marked “AC”. It should be illuminated when AC power is on.
2. Test the emergency operation of the fixture once every 3 months. Exit Sign should illuminate
under battery power when AC power is removed from the fixture.
3. Conduct a 90 minute discharge test once a year. Exit Sign should illuminate under battery power
for at least 90 minutes when AC power if removed from the fixture.
4. This fixture contains sealed Ni-Cad batteries. Used Ni-Cad batteries may not be disposed of in
the municipal solid waste stream. Ni-Cad batteries must be recycled or disposed of properly. For
information on local recycling drop off points, phone toll free 1-800-BATTERY.