Time Systems Time Recorder User's Manual

Mounting Unit on Wall

The unit can be mounted on a wall using the supplied mounting fittings. To mount the

unit on a wall, take the following steps:

The supplied screws are intended

for use on a thick wooden wall or

wooden column. Do not use

them on any other materials.

There is a danger that the unit

may come off etc.

1 Install the two larger screws into a wall

10 cm (3.94") apart. Be sure to keep about

3 mm (0.12") of the screw head out of the

wall.

2 Mount the wall mount fittings

as shown on the right.

Environmental Conditions

Avoid placing the unit in environments that are:

humid or dusty

exposed to direct sunshine

subject to frequent or continuous vibrations

outside the temperature range between -5˚ and 45˚C

affected by chemicals or ozone

3.94" (10cm)

0.12"

(3mm)

ENGLISH