Installation & Assembly

1
Installation Instructions for
Secure the mounting plate to the electrical box with the two mounting plate screws.
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate and secure it with the fixture screw using an Allen wrench.
Insert the crystal into the cover and secure it to the shade base using the washers and screws. Repeat for multiple crystals.
Place the shade and spacer onto the socket and secure them in place by screwing the collar nut onto the socket. Repeat for
multiple shades.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
1
2
3
1A
4
5
6
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is safety listed for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
7
8
LAMP
JUNCTION BOX
MOUNTING
PLATE
SOCKET
MOUNTING
PLATE SCREW
FIXTURE SCREW
ALLEN WRENCH
COVER
1
3
4
1
FIXTURE BASE
8
7
6
SHADE BASE
SCREW
WASHER
CRYSTAL
COLLAR NUT
SPACER
SHADE
5
1, 2, 3 and 4 Light Vanity