ETL-ES-Swirl-R-WH14.10 Owner's Manual Manual del usuario Swirl Please write model number here for future reference: / Por favor, incluya el número del modelo aquí para futura referencia: Net Weight: Peso Neto: 1 17.64 LBS 8.
ETL-ES-Swirl-R-WH14.10 ETL-ES-Swirl-R-WH14.10 Safety tips Consejos de seguridad OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT TO OUTLET BOX MARKED 'ACCEPTABLE FOR FAN SUPPORT OF 15.9 KG (35 LBS) OR LESS' AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX AND/OR SUPPORT DIRECTLY FROM BUILDING STRUCTURE.
ETL-ES-Swirl-R-WH14.10 ETL-ES-Swirl-R-WH14.
ETL-ES-Swirl-R-WH14.10 ETL-ES-Swirl-R-WH14.10 Mounting bracket Installation Instalación con soporte de montaje pREPARING for installation Antes de la instalación 2 1 3 2 1 2 Use metal outlet box suitable for fan support (must support 35 lbs). Before attaching fan to outlet box, ensure the outlet box is securely fastened by at least two points to a structural ceiling member (a loose box will cause the fan to wobble).
ETL-ES-Swirl-R-WH14.10 Mounting bracket Installation Instalación con soporte de montaje ETL-ES-Swirl-R-WH14.10 FLUSH MOUNT OPTION OPCIÓN DE INSTALACIÓN AL RAS MOUNTING OPTIONS OPCIONES DE MONTAJE 4 5 Choose a MOUNTING OPTION Elija una OPCIÓN DE MONTAJE 7 6 FLUSH MOUNT OPTION If flush mount option is selected, proceed to page 9, step 6. OPCIÓN DE INSTALACIÓN AL RAS Si elige la opción de montaje al ras, proceda a la página 9, paso 6.
ETL-ES-Swirl-R-WH14.10 NORMAL DOWNROD OPTION OPCIÓN CON VARILLA VERTICAL PARA TECHO NORMAL 8 ETL-ES-Swirl-R-WH14.10 EXTENDED DOWNROD OPTION OPCIÓN CON VARILLA VERTICAL MÁS LARGA 9 2 EXTENDED DOWNROD OPTION OPCIÓN CON VARILLA VERTICAL MÁS LARGA 10 2 11 3 3 1 Feed motor lead wires through downrod/canopy assembly and insert downrod into downrod yoke. Make sure to align hole in downrod with the hole in downrod yoke. Install yoke cross pin (1) through yoke and downrod.
ETL-ES-Swirl-R-WH14.10 ETL-ES-Swirl-R-WH14.10 MOUNTING MONTAJE EXTENDED DOWNROD OPTION OPCIÓN CON VARILLA VERTICAL MÁS LARGA 12 2 13 14 Carefully lift fan assembly onto mounting bracket. Rotate fan until notch on downrod ball (1) engages the ridge on the mounting bracket (2). This will allow for hands free wiring. Levante con cuidado el conjunto del ventilador hasta el soporte de montaje.
ETL-ES-Swirl-R-WH14.10 ETL-ES-Swirl-R-WH14.10 wiring OPTIONS OPCIÓN DE CABLEADO 15 PULL CHAIN WIRING OPTION 16 Secure To Ceiling Asegure el ventilador al TECHO WALL CONTROL WIRING OPTION 17 For flush mount fans, carefully lift fan from the mounting bracket, making sure not to break any wire connections. For downrod fans, slide the canopy up to the mounting bracket.
ETL-ES-Swirl-R-WH14.10 ETL-ES-Swirl-R-WH14.10 Blade Installation Instalación de las paletas 20 19 18 2 Light fixture installation Instalación del artefacto luminoso 21 22 2 1 1 2 Check the motor for plastic shipping stabilizer tabs (1), and remove them if they are present. Attach blade assembly to motor using the noise-dampening motor gaskets (2) and motor screws provided. Tighten screws securely. NOTE: Some models do not utilize motor gaskets, washers, or stabilizer tabs.
ETL-ES-Swirl-R-WH14.10 ETL-ES-Swirl-R-WH14.10 OPERATION AND MAINTENANCE Operación y mantenimiento Operation Operación Turn on the power and check operation of fan. The pull chain controls the fan speeds as follows: 1 pull - high; 2 pulls - medium; 3 pulls - low; 4 pulls - off. Speed settings for warm or cool weather depend on factors such as room size, ceiling height, number of fans and so on. The slide switch controls direction, forward or reverse.
ETL-ES-Swirl-R-WH14.10 Troubleshooting guide If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, please consult with your authorized electrician and do not attempt any electrical repairs yourself. TROUBLE SUGGESTED REMEDY 1. If fan does not start: 1.
ETL-ES-Swirl-R-WH14.10 ETL-ES-Swirl-R-WH14.10 PARTS LIST LISTA DE REPUESTOS # Description 1 1 . . . . . . . . . . . . . . . . . . . . . Mounting Bracket 2 . . . . . . . . . . . . . . . . . . . . . Blade Bracket 3 . . . . . . . . . . . . . . . . . . . . . Blade 4 . . . . . . . . . . . . . . . . . . . . . Glass 5 . . . . . . . . . . . . . . . . . . . . . Fan Speed Switch 6 . . . . . . . . . . . . . . . . . . . . . Light Control Switch 7 . . . . . . . . . . . . . . . . . . . . .
ETL-ES-Swirl-R-WH14.10 Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A. www.westinghouselighting.com , WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF are trademarks of Westinghouse Electric Corporation. Used under license by Westinghouse Lighting All rights reserved.
