Owner Manual

4
ASSEMBLY INSTRUCTIONS
ON
OFF
ON
OFF
Turn off circuit breakers and wall switch to
the fixture supply line leads. (Fig. 1)
DANGER: Failure to disconnect power
supply prior to installation may result in
serious injury or death.
1
Remove existing fixture and disconnect all
electrical wiring. (Fig. 2)
2
1.
2.
Unwrap bare wire from the other two wires in the
fixture canopy. Remove mounting strap from the
fixture by removing mounting strap screws from the
edges of the fixture. (Fig. 3A) Save mounting strap
screws for later use.
----- OR ------
Remove decorative nuts from mounting strap.
(Fig. 3B) Save decorative nuts for later use.
Note: Do not remove fixture screws and nuts on
mounting strap -- refer to Fig. 3B.
3A
3.
Nuts
Fixture Screws
Canopy
E
3B
Mounting Strap
Mounting Strap
Decorative Nuts
Mounting
Strap
Screws