Owner Manual

LIMITED WARRANTY
(hereinafter known as “the Distributor”) warrants all of its Products to be free from defects in material and workmanship, subject
to certain conditions and exclusions, for the period of one (1) year from the date the Product was shipped to the original end
use purchaser.
The Distributor will, at its discretion, repair, replace or make appropriate adjustment where inspection discloses any defects
occurring in normal usage within the applicable time period above, subject to the following conditions and exclusions.
The following costs, expenses and damages are not covered by the provisions of this limited warranty: (1.) labor costs
including, but not limited to, costs associated with the removal and reinstallation of Product; (2.) shipping and freight expenses
required to return Product to the Distributor.
The warranty only applies to the original end use purchaser and original installation of Products. This warranty is not
transferable. The provisions of this warranty do not apply to products that are used in commercial applications; that are used for
purposes for which they are not designed or intended; which have been subjected to alteration, accidental damage, abuse,
misuse, negligence or accident; which have been improperly stored, installed, maintained or operated; which have been used in
violation of written instructions provided by the Distributor; which have been subjected to improper temperature, humidity or
other environmental conditions; or which, based on examination by the Distributor, do not disclose to the satisfaction of the
Distributor non-conformance to the warranty. Additionally, this warranty DOES NOT COVER scratches, abrasions, or
deterioration due to the use of paints, solvents, chemicals or abrasive cleaning techniques.
The above warranty also does not apply if:
• The original bill of sale, delivery date, or product number cannot be verified.
• The parts claimed to be defective are not returned for inspection if so requested by the Distributor.
• The product is not in the possession of the original end use purchaser at the time warranty claim is made.
Finish Warranty Exclusions:
• Finishes for fixtures installed outdoors are subject to change due to prolonged exposure to sunlight, pollutants and other
environmental conditions. Any claim for fading, discoloration or “patina” of a finish on an outdoor fixture is not applicable to
the above warranty. See the “Care & Cleaning" instructions below for proper care and maintenance of your fixture.
• The environment within ten miles of a sea coast can be extremely corrosive. Even with the appropriate maintenance,
products installed in this environment will typically deteriorate more than products installed in a less severe environment.
Some corrosion and/or deterioration is considered "normal wear" in this environment. Any claim for finish failures or for
corrosion of other components due to coastal environment conditions is not applicable to the above warranty.
The Distributor does not authorize any person to create for it any obligation or liability in connection with its Products. The
maximum liability is limited to the original purchase price of the product. No action arising out of any claimed breach of this
warranty by the Distributor may be brought by the original end use purchaser more than one (1) year after the cause of action
has arisen.
IMPLIED WARRANTIES INCLUDING THAT OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
EXPRESSLY LIMITED TO THE DURATION OF THIS WARRANTY. THE DISTRIBUTOR AND/OR SELLER DISCLAIMS ANY
LIABILITY FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do
not allow limitations on incidental or consequential damages or how long an implied warranty lasts, so that the above limitations
may not fully apply to you. Refer to your local laws for your specific rights under this warranty.
CARE & CLEANING: Initial care for finishes requires periodic cleaning with a soft cloth, dampened with water. A mild
non-abrasive soap may be used along with a soft cloth and water if the fixture is very dirty. Particular care should be taken to
avoid abrasive materials and strong cleaning agents as they will quickly destroy the protective coatings and subject the finish to
oxidation and discoloration.
9