Instruction Manual

ELECTRIC CONNECTIONS

WARNING: To avoid possible electrical shock, be sure you have turned o the power

at the main circuit panel before wiring. Follow the steps below to connect the fan to

your household wiring. Use the wire connecting nuts supplied with your fan. Secure

the connector with electrical tape. Make sure there are no loose wire stands or connections.

WARNING: If your house wires are dierent colors than referenced in this manual,

stop immediately. A professional electrician is recommended to determine proper wiring.

Step 1. Insert the receiver into the mounting bracket, and keep flat in opposition of

ceiling. (Fig. 13)

Step 2. Motor to Receiver Electrical Connections: Connect the BLACK wire from the fan

to BLACK wire marked "TO MOTOR L" from the receiver. Connect the WHITE wire from

the fan to the WHITE wire marked "TO MOTOR N" from the receiver. Connect the BLUE

wire from the fan to the BLUE wire marked "FOR LIGHT " from the receiver. Secure all

the wire connections with the plastic wire connectors provided. ( Fig. 14)

Step 3. Remote Receiver to Outlet Box Electrical Connections: Connect the BLACK (hot)

wire from the ceiling to the BLACK wire marked “AC in L” from the wall control . Connect

the WHITE (Neutral ) wire from the ceiling to the WHITE wire marked “ AC in N” from the

receiver. Connect the BLACK (To Motor L) wire from the wall control to the BLACK wire

marked “ AC in L” from the receiver. Secure the wire connections with the plastic wire

connectors provided .(Fig. 14)

Fig. 13

Fig. 14

Receiver

Mounting Bracket

White (Neutral)

White("AC IN N")

White("TO MOTOR N")

Ground wire

White (Neutral)

Blue(FOR LIGHT)

Black (motor)

Receiver

Outlex box

Black ("TO MOTOR L")

Black("AC" IN L")

Blue(for light)

Black (hot)

Black ("AC" IN L")

Black ("TO MOTOR L")

Ground/Earth

Green or bare copper (ground)

60" LED