Instruction Manual

Fig. 15

Fig. 16

Step 4. If your outlet box has a ground wire ( green or bare copper ) connect

it to the fan ground wires : otherwise connect the fan ground wire to the

mounting bracket. Secure the wire connection with a plastic nut provided.

After connecting the wires, spread them apart so that the green and white

wires are on one side of the outlet box and black and blue wires are on the

other side. (Fig. 14)

NOTE: Carefully tuck the wire connections up into the outlet box.

NOTE: Fan must be installed at a maximum distance of 30 feet from the

transmitting unit for proper signal transmission between the transmitting

unit and the fan’s receiving unit.

Step 1. Remove one of the two shoulder screws in the mounting bracket. Loosen

the second shoulder screw without fully removing it. (Fig. 15)

Step 2. Assemble canopy by rotating key slot in canopy over shoulder screw

in mounting bracket. Reinstall the shoulder screw that was previously removed,

then retighten two shoulder screws securely.(Fig.16)

FINISHING THE INSTALLATION

ELECTRIC CONNECTIONS

Mounting Bracket

Shoulder Screw

Canopy

Shoulder Screw