Instruction Manual

INSTALLING THE WALL CONTROL

All wiring must be in accordance with the National Electrical Code and local electrical codes.

Electrical installation should be performed by a qualified licensed electrician. Select a location

to install your wall control. You can replace an existing wall switch, or install the wall control on

ANY flat surface.

NOTE: SWITCH INSTALLATION MUST COMPLY WITH ALL LOCAL AND NATIONAL

ELECTRIC CODE .

Step 1. Remove the existing wall plate and the old switch from the wall outlet box. Wire nut

the BLACK leads (hot) together and push back inside the outlet box. (Fig. 19) or select the

desired location with a new wall outlet box.

Step 2. Use the screws provided to secure the wall control to the outlet box.(Fig. 20)

Outlet Box

Switch

Wall Plate

Outlet Box

Wall Control

Fig. 19

Fig. 20