Instruction Manual

WARNING:

Now lift the motor assembly into position and place the hanger ball into the

hanger bracket. Rotate until the "Check Tab" has dropped into the "Registration Slot "

and seats ﬁrmly. ( Fig. 10) The entire motor body should not rotate if this is done

correctly.

Failure to properly seat the "Check Tab" can damage the ceiling fan during

operation.

Step 6.

HANGING THE FAN

Fig. 9

Fig. 10

Tab

Hanger Ball

Slot

Blade

Blade Bracker

60" LED

Step 5. Attach each blade to blade bracket, insert the screws into the blade holder ,

through the blade and into the blade bracket, securely tighten the four screws. ( Fig. 9)

Blade Holder