Installation Instructions

7
10. INSTALLATING THE
MOUNTING PLATE
Step 1. Remove the 1 of 3 screws from the
mounting ring and loosen the other 2 screws.
(Do not remove)
Step 2. Place the key holes on the mounting
plate over the 2 screws previously loosened
from the mounting ring, turn mounting plate
until it locks in place at the narrow section of
the key holes. Secure by tightening the 2
screws previously loosened and the one
previously removed. (Fig. 15)
Figure 15
9. ATTACHING THE FAN
BLADES
Step 1. Insert the blade through the slot on the
motor housing. Align holes and fasten the
blade to the blade bracket with screws and
fiber washers provided. (Fig. 14)
Step 2. Repeat this procedure for remaining
blades.
CAUTION: Make sure all screws are
tightened securely.
Figure 14
Screws
Fiber washers
Blade
Slots
Mounting
plate
Mounting ring
Screws