Installation & Assembly

Product Name:
White Wood Shoe Storage Cabinet
Instruction Manual
Please save this manual for future reference.
Step 6
Secure cabinet to the wall using hardware (G), see image below.
Installation Tips
Measure the distance between the hardware on the cabinet using a measuring tape.
Locate the stud in the wall or joist in the wall where you plan to mount the storage cabinet. Use a stud finder or
tap the wall lightly with a hammer. A solid thud indicates a stud, while a hollow sound means no stud is present.
Mark the storage cabinet hardware measurement on the wall with a pencil. When possible, all screws used to
secure the storage cabinet to the wall should be in a stud.
Drill a pilot hole through the drywall and into the stud at the marked location. Use a drill bit one size smaller than
the mounting screws.
Drill a hole slightly larger than a toggle bolt for any mounting screws that won't be located in the stud. Toggle
bolts have a metal sheath that opens like wings. These wings anchor the screw when no stud is present and can
support loads of 25 pounds or more without damaging the wall.