Caution : You must read this before you proceed Lift up Chair Picture Label Picture Description QTY A Chair Backrest 1 B Left Arm Pillow 1
C Right Arm Pillow 1 D Chair Base with Footrest 1 E Transformer 1 F G Before Beginning Assembly: Hand Controller Leg 1 4
Parts Introduction Chair Backrest(A) Right Arm Pillow(C) Left Arm Pillow(B) Hand Controller(F) Transformer(E) Leg(G) Chair Base with Footrest(D) FRONT FACING This Lift up Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Lift up Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 B D Take out the non-woven Bag with Left Arm Pillow(B) inside from the back of Chair Base with Footrest(D). And remove the Left Arm Pillow(B) from nonwoven bag. Step 3 C D Take out the non-woven bag with Right Arm Pillow(C) from inside from the bottom of the mechanism. Then remove the Right Arm Pillow(C) from nonwoven bag. Step 4 A C D E D F Take out the accessories package from the bottom of the mechanism.
Step 5 G D Turn to Chair Base(D) on it's side as shown above. Attach Leg(G) to Chair Base with Footrest(D) by inserting the threaded stem into the threaded mounting postion at the corner of the Chair Base. Tighten by turning the Leg clockwise. Repeat the same step to install the remaining three Legs(G). Tighten Legs until secure. The Chair is large and heavy, always have a second adult to assist you when moving and lifting it.
Step 7 A B B C C D Attach the Left Arm Pillow(B) using the prefabricated Zipper. Repeat the same process to attach Right Arm Pillow(C). Step 8 A E F Connect the Transformer(E) to the corresponding plug at the back of the Chair. Then connect the Hand Controller(F) to the other plug at the back of the Chair. Smooth down the fabric flap on the Chair Backrest(A).
User Instructions. Lift up Chair Please read the Instruction Manual below carefully before use. Supervise children, when they are using this Lift up Chair. To get into a reclined posture - To Recline backrest Sit into the seat. Press the button on the Hand Controller with the down symbol. To get out of chair - Press the button of Hand Controller with the up symbol. Use the button on the Hand Controller to activate the up and down motion.
Step 1)Remove the plug of the Transformer(E) and the Hand Controller(F). Step 2)Release the locking mechanism from the prefabricated slide lock gadget with a Screwdriver, first on the right side, and repeat the process with the left side. To Remove the Chair Backrest(A): Open the back flap on the right side. Pull up the right side of Chair Backrest(A). Then repeat the process to pull up the left side of Chair Backrest(A). Pull open the armrest zippers, to take off the armrests.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. Do not place furniture under direct sunlight. Do not place furniture near heating or cooling vents. Do not write on furniture without a padded barrier to protect the Do not place furniture outside . For indoor use only . Not for commercial use. For residential use only . Stains may be removed with mild soap solution and damp Children should not climb or jump on the furniture. Chair can't sit.