1 1. SAFETY RULES "CAUTION-RISK OF FIRE" CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR. Special Notice: This appliance is equipped with a "Wattage Limiting Device" required by the United States Department of Energy. The device has been installed at the factory and can not be removed. WARNING! RISK OF ELECTRIC SHOCK All electrical connections must be made in accordance with local codes, ordinances, or national codes.
LED Light Fixture 2 3. REMOVING THE DECORATIVE BOTTOM COVER & BOTTOM COVER CAUTION: Before starting installation, disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box. Turning power off using the fan switch is not sufficient to prevent electric shock. Step 1. Remove the Decorative bottom cover from the ceiling fan by turning bottom cover counterclockwise. (see figure 1) Step 2.
3 4. INSTALLING THE LIGHT FIXTURE 1. Raise and hold the light plate close to the mounting plate of the ceiling fan. Attach the fixture wires to the fan by pushing the wire connectors together. White from the fixture to the White wire from the fan. Blue wire from the fixture to the Black wire from the fan. (Fig 3) 2. Carefully push all wires back into the mounting plate, then install the light plate onto the mounting plate with 3 screws provided. Be sure to tighten all screws. (Fig.