Full Product Manual

www.LaViewUSA.com www.LaViewUSA.com18 19
Playback Calendar
Note:
If a camera has recordings from that day, the icon
in the calendar is displayed as
. Otherwise it is
displayed as
. The selected date is surrounded
by a white rectangle, as in .
In the Playback interface:
The toolbar at the bottom of the Playback interface
can be used to control playing progress.
Interface of Playback by Time
Toolbar of Playback by Time
Note: The
indicates the start/end time of the recording.
Detailed Explanation of Playback-by-time
Interface
Note:
Playback progress bar: Use the mouse to click on
any point in the progress bar or drag the progress bar
to locate specic frames.
Playing Back by Event Search
Purpose:
Play back specic les on one or several channels
by restricting event type (e.g. alarm input and
motion detection).
Steps:
Enter the Playback interface.
Menu>Playback
Select Event in the drop-down list on the top-left.
Select Alarm Input or Motion as the event type and
set the Start time and End time.
Alarm Input Search Interface
Motion Search Interface
Click the Search button to get search results from
the information provided. Refer to right-side bar for
results.
Search Result Bar(Alarm In and Motion)
Click button to play back the le.
Note:
Pre-play and post-play can be congured.
If the event is set to trigger recording on multiple
channels, clicking the
will activate the Synch
Playback interface. You can select which channels
to play back synchronously.
Click the Back button to go back to the search
interface.
Playback interface:
The toolbar at the bottom of the Playback interface
can be used to control playing progress.
Interface of Playback by Event
Toolbar of Playback by Event
Detailed Explanation of Playback-by-Event
Toolbar
Note:
Playback progress bar: Use the mouse to click on
any point in the progress bar or drag the progress bar
to locate specic frames.
Smart Search
Purpose:
In order to locate motion detection events easily in
the playback progress bar, you can analyze a certain
area/scene to get all of the related motion detection
events that occurred in the area.
Note: The smart search function may vary according
to the camera connected to the NVR.
Before you start:
Log in the network camera using your web browser,
and enable the Dynamic Analysis for Motion by
checking the checkbox next to it. Enter the motion
detection conguration interface:
Conguration> Advanced Conguration> Events>
Motion Detection.