Full Product Manual

www.LaViewUSA.com www.LaViewUSA.com20 21
Motion Detection Settings
Enable the motion detection function and set the
arming area to full screen using the NVR’s local
menu.
Steps:
Enter the Playback interface and play a record le.
Interface of Playback by Time
Click on the playback toolbar to enter Smart
Search mode.
Click and drag the mouse to crop an area. You can
click the
button to set the whole screen as a
search area. After cropping an area, click the
button to execute smart search in this area.
Note: Multi-area searching modes are supported.
Crop of Smart Search Area
Smart search ndings will be marked as in the
progress bar.
The hidden list of recorded les appear when mouse
is moved to the right of the playback interface.
Smart Search Findings
Smart Search Playback Toolbar
Note:
Indicates the start/end time of the record.
Detailed Explanation of Smart Search
Playback Toolbar
Note:
Playback progress bar: Use the mouse to click on
any point in the progress bar or drag the progress bar
to locate specic frames.
Digital Zoom
Steps:
Click the
button on the playback toolbar to
enter Digital Zoom interface.
Use the mouse to crop an area and the cropped
image will be enlarged up to 16 times.
Draw Area for Digital Zoom
Right-click the image to exit the digital zoom
interface.
Reverse Playback of Multi-
channel
Purpose:
You can play back multi-channel recordings in
reverse. 16-ch (with up to 1280*720 resolution),
4-ch (with up to 1920*1080P resolution) and 1-ch
(with up to 2560*1920 resolution) reverse playback
are all supported.
Steps:
Enter Playback interface.
Menu>Playback
Check multiple checkboxes to select multiple
channels, and select a date on the calendar.
4-ch Synchronous Playback Interface
Click to play back recordings in reverse.