Full Product Manual

www.LaViewUSA.com www.LaViewUSA.com26 27
value is 60min. If the NVR is connected to a
public network, you should use a NTP server
that has a me synchronizaon funcon, such
as the server at the Naonal Time Center (IP
Address: 210.72.145.44). If the NVR is set up
in a customized network, NTP soware can be
used to establish a NTP server used for me
synchronizaon.
Conguring RTSP
Purpose:
The RTSP (Real Time Streaming Protocol) is
a network control protocol designed for use in
entertainment and communications systems to
control streaming media servers.
Steps:
1. Enter the Network Settings menu
Menu >Conguraon> Network
2. Select the More Settings tab to enter the
More Settings menu
RTSP Settings Interface
3. Enter the RTSP port in the text eld
next to RTSP Service Port. The default
RTSP port is 554, and you can change it
accordingly.
4. Click Apply button to save settings and
exit the menu.
Conguring Server and HTTP
Ports
Purpose:
You can change the server and HTTP ports in the
Network Settings menu. The default server port is
8000 and the default HTTP port is 80.
Steps:
1. Enter the Network Settings interface.
Menu >Conguration> Network
2. Select the More Settings tab to enter the
More Settings interface.
More Settings Interface
3. Enter the Server Port and HTTP Port in
the text elds. The default Server Port is
8000 and the HTTP Port is 80, and you
can change them according to different
requirements.
4. Click Apply button to save settigns and
exit the interface.
Note: The Server Port should be set to the range of
2000-65535 and is used for remote client soware
access. The HTTP port is used for remote IE access.
Conguring Email
Purpose:
The system can be congured to send an email
notication to designated users if, an alarm motion
event is detected or if the administrator password
is changed.
Before conguring the email Settings, the NVR
must be connected to a local area network (LAN)
that maintains an SMTP mail server. The network
must also be connected to either an intranet or the
Internet depending on the location of the e-mail
accounts to which you want to send notications.
Steps:
1. Enter the Network Settings interface.
Menu >Conguration> Network
2. Set the IPv4 Address, IPv4 Subnet Mask,
IPv4 Gateway and the Preferred DNS Server
in the Network Settings menu.
3. Click the Apply button to save the settings.
1. Select the Email tab to enter the Email
Settings interface.
Email Settings Interface
2. Congure the following settings:
Server Authentication (optional):
Check the checkbox to enable the server
authentication feature.
User Name: The user account of sender’s
email for SMTP server authentication.
Password: The password of sender’s email
for SMTP server authentication.
SMTP Server: The SMTP Server IP address
or host name (e.g., smtp.263xmail.com).
SMTP Port No.: The SMTP port. The
default TCP/IP port used for SMTP is 25.
Enable SSL (optional): Click the checkbox
to enable SSL if required by the SMTP
server.
Sender: The name of sender.
Sender’s Address: The email address of
sender.
Receivers: Select the receiver. Up to 3
receivers can be congured.
Receiver: The name of user to be notied.
Receiver’s Address: The email address of
user to be notied.
Attached Pictures: Check the checkbox
next to Enable Attached Picture if you
want to send emails with attached alarm
scene images. The interval is the time before
another alarm scene image is sent. You can
also set SMTP port and enable SSL here.
Interval: The interval refers to the time
between two alam scene pictures.
E-mail Test: Sends a test message to verify
that the SMTP server can be reached.
3. Click the Apply button to save settings.
4. You can click Test button to test whether
your settings work. An Attention message
box will pop up. Refer to 0.
Remote Viewing
Purpose:
You can view both the live and recorded footage
from your mobile devices like smart phones, tablets
or laptops.
Steps:
1.Connect the NVR to your router.
2.Find out the Local IP address of the
NVR in your Local Area Network (i.e.:
192.168.x.x, 10.0.0.x)
3.In your network router setting interface,
complete the Port Forwarding of the HTTP
Port (Default: 80), SERVER Port (Default:
8000) and RTSP Port (Default: 8554) for
the IP address of the NVR.
4.Download LaView Net / LaView Net
HD from the IOS App Store or Google
Play Store
5.Set up the device in the app by going to
Menu > Devices > Add > Manual Adding.
See gure below for more details
6.Save the setting and click on ‘Start Live
View’ to view the footage.
Alias: Name your NVR
Register Mode: IP/Domain
Address: Use Local IP address if your mobile device
is in the same Local Area Network as your NVR.
Otherwise use Public IP address of your network
(Can be found at www.canyouseeme.org).
Port: Use Server Port (Default: 8000)
User Name: Your NVR Login credentials (Default:
admin)
Password: Your NVR login password
Camera No.: Does not apply. Please leave it default.