Full Product Manual

www.LaViewUSA.com www.LaViewUSA.com30 31
5. After reboot of device, enter the HDD
Information interface.
Menu > HDD> General
6. Select HDD from the list and click the
icon to enter the Local HDD Settings
interface.
Local HDD Settings Interface
7. Select the Group number for the current
HDD.
Note: The default group No. for each HDD is 1.
8. Click the OK button to conrm settings.
Confirm HDD Group Settings
9. In the pop-up message box, click the Ye s
button to conrm the settings.
Setting HDD Property
Purpose:
The HDD property can be set to redundancy, read-
only or read/write (R/W). Before setting the HDD
property, please set the storage mode to Group
(refer to steps 1-4 of Chapter Setting HDD Groups
).
A HDD can be set to read-only to prevent
important recorded les from being overwritten
when the HDD becomes full in overwrite recording
mode.
When the HDD property is set to redundancy, the
video can be recorded both onto the redundancy
HDD and the R/W HDD simultaneously so as to
ensure that reliability of video data is highly secured
and realiable.
Steps:
1. Enter the HDD Information interface.
Menu > HDD> General
2. Select HDD from the list and click the
icon to enter the Local HDD Settings
interface.
Set HDD Property
3. Set the HDD property to R/W, Read-only
or Redundancy.
4. Click the OK button to save settings and
exit the interface.
5. In the HDD Information menu, the HDD
property will be displayed in the list.
Note: At least 2 hard disks must be installed on
your NVR (and one must be set to R/W property) if
you want to set a HDD to Redundancy.
Conguring OSD Settings
Purpose:
You can congure the OSD (On-Screen Display)
settings for the camera, including date /time, camera
name, etc.
Steps:
1. Enter the OSD Conguration interface.
Menu > Camera > OSD
2. Select the camera to congure OSD
settings.
3. Edit the Camera Name in the text eld.
4. Congure the Display Name, Display
Date and Display Week by clicking the
checkbox.
5. Select the Date Format, Time Format and
Display Mode.
6. You can use the mouse to click and drag
the text frame on the preview window to
adjust the OSD position.
7. Click the Apply button to apply settings.
Conguring Privacy Mask
Purpose:
You can congure up to four privacy mask zones
which will prevent certain areas from being viewed
or recorded.
Steps:
1. Enter the Privacy Mask Settings interface.
Menu > Camera >Privacy Mask
2. Select the camera to set a privacy mask
on.
3. Check the checkbox next to Enable
Privacy Mask to enable this feature.
Privacy Mask Settings Interface
4. Use the mouse to crop a zone on the
window. Different zones will be marked
with different frame colors.
Note: Up to 4 privacy masks zones can be
congured and the size of each area can be
adjusted.
5. The designated privacy mask zones on
the window can be deleted by clicking
the corresponding Clear Zone1-4 buttons
on the right side of the window, or you
canclick Clear All to clear all zones.
Set Privacy Mask Area
6. Click the Apply button to save settings.
Conguring Video
Parameters
Steps:
1. Enter the Image Settings interface.
Menu > Camera >Image
Image Settings Interface
2. Select the camera to set image parameters
for.
3. Click the arrows to adjust each parameter.
Click the Apply button to save settings.