Full Product Manual

www.LaViewUSA.com www.LaViewUSA.com34 35
Export Log Files
7. Select the backup device from the
dropdown list under Device Name.
8. Click Export to export the log les to the
selected backup device.
You can click the New Folder button to
create a new folder in the backup device,
or click the Format button to format the
backup device before log export.
Notes:
1) Please connect the backup device to NVR
before initiating log export.
2) The log les exported to the backup device
are named according to exporting time, e.g.,
20110514124841logBack.txt.
To export all the log les:
You can enter the Log Export interface.
Menu> Maintenance> Log Information> Log
Export
Log Export Interface
Check the checkbox next to the HDD, and
click the Export button to export all the
log les stored in the HDD.
Upgrading System
Purpose:
The rmware on your NVR can be upgraded by
local backup device or remote FTP server.
Upgrading by Local Backup
Device
Steps:
1. Connect your NVR with a local backup
device where the update rmware le is
located.
2. Enter the Upgrade interface.
Menu >Maintenance>Upgrade
3. Click the Local Upgrade tab to enter the
local upgrade menu.
Local Upgrade Menu
4. Select the update rmware le from the
backup device.
5. Click the Upgrade button to start
upgrade.
6. After the upgrading is complete, reboot
the NVR to activate the new rmware.
Restoring Default Settings
Steps:
1. Enter the Default interface.
Menu > Maintenance > Default
Restore Factory Default
2. Click the OK button to restore the default
settings.
Note: Besides network parameters (IP address,
subnet mask, gateway, MTU, default route and
server port), all other parameters of the device
will be restored to factory default sengs.
Conguring General
Settings
Purpose:
Congure the output resolution, system time, and
mouse pointer speed. Menu > Conguration >
General interface.
Steps:
1. Enter the General Settings interface.
Menu >Conguration> General
2. Select the General tab.
General Settings Interface
3. Congure the following settings:
• Language: The default language
used is English.
• Resolution: Select the output
resolution, which must be the
same as the resolution of the
monitor screen.
• Time Zone: Select the time zone.
• Date Format: Select the date
format.
• System Date: Select the system
date.
• System Time: Select the system
time.
• Mouse Pointer Speed: Set the
speed of the pointer; 4 levels are
congurable.
• Enable Wizard: Enable/disable
the Wizard to appear when the
device starts up.
• Enable ID Authentication:
Enable/disable the use of the
login password.
4. Click the Apply button to save settings.
Conguring DST Settings
Steps:
1. Enter the General Settings interface.
Menu >Conguration>General
2. Select the DST Settings tab.
DST Settings Interface
Check the checkbox next to the Auto DST
Adjustment item or check the Enable DST
checkbox, then choose the date of the DST period.
Managing User Accounts
Purpose:
The default account in the NVR is Administrator.
The user name is admin and the password is 12345.
The Administrator has the permission to add/delete
users and congure user parameters.
Adding a User
Steps:
1. Enter the User Management interface.
Menu >Conguration>User
User Management Interface
2. Click the Add button to enter the Add
User menu.