Full Product Manual

www.LaViewUSA.com www.LaViewUSA.com10 11
Adjusting Live View
Settings
Purpose:
Live View settings can be customized according to
your needs. You can congure the output interface,
dwell time for each channel, mute /volume for
audio, the screen number for each channel, etc.
Steps:
1. Enter the Live View Settings interface.
Menu> Conguration> Live View
Live View-General
The settings available in this menu include:
• Video Output Interface: Designates the
output to be used options include VGA/
HDMI.
• Live View Mode: Designates the display
mode to be used for Live View.
• Dwell Time: The time in seconds between
switching of channels when auto-switch is
enabled in Live View.
• Enable Audio Output: Enables/disables
audio output for the selected video output.
• Event Output: Designates the output where
to show event video.
• Full Screen Monitoring Dwell Time: The
time in seconds to show an event on screen.
2. Setting order of cameras
Live View- Camera Order
To set the camera order:
1) Select a View mode
.
2) Select the small box, and double-
click on the camera number
to display that channel on the
window.
You can click
button to
enable live view for all the
channels and click
to stop
live view.
3) Click the Apply button to save the
settings.
Conguring PTZ Settings
Purpose:
Follow the procedure to set the parameters for PTZ.
The conguring of the PTZ parameters must be
done before you can control the PTZ camera.
Steps:
1. Enter the PTZ Settings interface.
Menu >Camera> PTZ
PTZ- General
2. Choose the camera in the Camera
dropdown list.
3. Enter the parameters of the PTZ camera.
Note: All the parameters should be in the PTZ
camera parameters section of the camera manual.
Example: If the PTZ camera uses the
protocol of DRAGON, you should select
DRAGON in the PTZ Protocol eld.
4. Click Apply button to save the settings.
Setting PTZ Presets,
Patrols & Patterns
Before you start:
Please make sure that the presets, patrols and
patterns are be supported by PTZ protocols.
Customizing Presets
Purpose:
Follow the steps to set the Preset location, which is
where you want the PTZ camera to point when an
event takes place.
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
PTZ- More Settings
2. Use the directional button to wheel the
camera to the location that you want to as preset.
3. Click the round icon next to Save
Preset.
4. Click the preset number to save the
preset.
Repeat the steps2-4 to save more presets. If the
number of the presets you want to save is more
than 17, you can click […] and choose the available
numbers.
More Presets
Calling Presets
Purpose:
This feature enables the camera to point to a
specied position such as a window when a preset
is needed.
Call preset in the PTZ setting interface:
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
2. Check the round icon of Call Preset.