Full Product Manual

www.LaViewUSA.com www.LaViewUSA.com12 13
PTZ- Call Preset
3. Choose the preset number.
Call preset in live view mode:
Steps:
1. Press the PTZ button on the front panel
or click the PTZ Control icon in the
quick setting bar to enter the PTZ setting
menu in live view mode.
PTZ Toolbar
2. Choose Camera in the list on the menu.
3. Double click the preset in the Preset list
to call it.
The camera will move to the saved
location from the preset selected.
Conguring Encoding
Parameters
Purpose:
By conguring the encoding parameters you can
adjust image quality, through changing transmission
stream type, resolution. etc.
Before you start:
Make sure that the HDD has already been installed.
If not, please install a HDD and initialize it.
(Menu>HDD>General)
HDD- General
Check the storage mode of the HDD:
Click Advanced to check the storage mode of the
HDD.
If the HDD mode is Quota, please set the maximum
record capacity and maximum picture capacity.
For detailed information, see Chapter Conguring
Quota Mode.
If the HDD mode is Group, you should set the
HDD group. For detailed information, see Chapter
Conguring HDD Group for Recording.
HDD- Advanced
Steps:
Enter the Record settings interface to congure the
encoding parameters:
Menu>Record>Encoding
Record Encoding
Encoding Parameters for Recording
Select Record tab page to congure stream type,
resolution, and other parameters as needed.
Pre-record: The amount of time to be recorded
prior to an alarm-triggered event. For example, if
you set the pre-record time as 5 seconds, when an
alarm triggers recording at 10:00, the camera saves
video starting at 9:59:55.
Post-record: The time you set to be recorded after
the event. For example, if you set the post-record
time as 5 seconds, when an alarm triggered the
recording ends at 11:00, it continues recording till
11:00:05.
Expiration Time: Expired time, is the amount of
time for a record le to be kept in the HDD. If the
deadline is reached, the le will be deleted. You can
set the expired time to 0, and then les will never be
deleted. Storage time for les should be determined
by the capacity of the HDD.
Redundant Record: Enabling redundant record
means the recording is saved in the redundant HDD.
See Chapter Conguring Redundant Recording.
Record Audio: Check the checkbox to enable or
disable audio recording.
Click Apply to save the settings.
Encoding Parameters Settings for Sub-stream
Enter the Sub-stream tab page.
Sub-stream Encoding
Congure the parameters of the camera.
Click Apply to save the settings.
Conguring Record
Schedule
Purpose:
Set the recording schedule for the camera to
automatically start/stop recording according to the
congured schedule.
Steps:
Enter the Record Schedule interface.