Full Product Manual

www.LaViewUSA.com www.LaViewUSA.com14 15
Menu>Record>Schedule
Congure Record Schedule
Select Record Schedule.
Record Schedule
Choose the camera you want to congure.
check the checkbox next to Enable Schedule item.
Click Edit button or click the icon under the edit
button and click and drag the schedule desired on
the panel.
Edit the schedule:
In the message box, you can choose the day to which
you want to set schedule.
Recording Schedule Interface
Click the button to set a recording schedule.
To schedule all-day recording, check the checkbox
next to All Day.
Edit Schedule
To arrange any other schedule, leave the All Day
checkbox blank and set the Start/End time.
Note: Up to 8 periods can be congured for each
day. The time periods cannot be overlapped.
Repeat these steps to schedule recording for other
days of the week. If the schedule can also be applied
to other days, click Copy.
Copy Schedule to Other Days
Click OK to go back to upper level menu.
Click Apply in the Record Schedule interface to
save the settings.
Draw the schedule:
Click on the color icons, you can choose the
scheduled recording type as normal or event
triggered.
Draw the Schedule
Descriptions of the scheduled recording icons are
shown in the gure below.
Descriptions of the scheduled recording icons
Click the Apply button to validate the settings.
If you wish to use these settings for other channels,
click Copy, then choose the channel to which you
want to copy the settings.
Copy Schedule to Other Channels
Conguring Motion
Detection Record
Purpose:
Follow these steps to set the motion detection
parameters. In live view mode, when a motion
detection event takes place, the NVR can analyze
it and carry out a variety of actions to handle it.
Enabling motion detection function can trigger
certain channels to start recording, full screen
monitoring, audio warning, notify the surveillance
center etc.
Steps:
Enter the Motion Detection interface.
Menu>Camera>Motion
Motion Detection
Congure Motion Detection：
Choose camera you want to congure.
Check the checkbox next to Enable Motion
Detection.
Crop the area for motion detection by mouse. If you
want to set motion detection for the area shot by the
camera, click Full Screen. To start over,
click Clear.
Motion Detection- Grid
Click Setting to select channels that will link to the
motion detection trigger.
Motion Detection Settings