Full Product Manual

MAINTENANCE

Fig. 39 Fig. 40

Fig. 42Fig. 41

■ Reinstall the cleaned or a new spark plug by turning it clockwise into place (Fig. 42).

■ Reinstall the spark plug cap into place.

■ Reinstall the spark plug cover and secure it with the hex wrench.

NOTICE: Be careful not to cross-thread the spark plug. Cross-threading will seriously damage the

product.

STORAGE

Clean the trimmer of any debris and store indoors in a dry, well-ventilated area that is inaccessible

to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.

Abide by all ISO and local regulations for the safe storage and handling of gasoline.

Storing for 30 days or longer:

Drain all the fuel from the tank into a container approved for storing gasoline. Press the primer bulb

3 - 4 times to remove the remaining fuel from the carburetor. Run the engine until it stops.

with a new one. DO NOT use a blowing tool to clean as the movement of dirt may damage the

engine.

■ Adjust spark plug gap by bending outer electrode (Fig. 41).

Outer Electrode

0.026 in. (0.65 mm)