Full Product Manual

MAINTENANCE SCHEDULE
* CATALYTIC MUFFLER ASSEMBLY
SPARK SCREEN
* AIR FILTER ASSEMBLY
Includes: Filter Screen
* CARBURETOR ASSEMBLY
Includes: Gaskets
Y
Y
Y
Y
Y
Y
Y
* FUEL TANK ASSEMBLY
Includes: Fuel Lines & Fuel Tank Cap
Fuel Filter
* IGNITION ASSEMBLY
Includes: Spark Plug
Maintenance Part
Inspect For
Damage
Before
Each Use
Clean
Every
5 Hours
Replace
Every
25 Hours
or Yearly
Replace
Every
50 Hours
MAINTENANCE
HIGH ALTITUDE ENGINE OPERATION
Initially your engine is configured for operation below 2000 ft. altitude. If the trimmer is being used
above 2000 ft. altitude, the engine must be re-configured accordingly. Operating the engine with
the wrong engine configuration at a given altitude may increase its emissions, drop fuel efficiency,
reduce performance and cause irreparable damage. Engines configured for high altitude operation
will need to be reconfigured for use in standard altitude conditions. Your authorized service center
should ensure that your engine is properly configured for your location.
THIS PRODUCT WAS MANUFACTURED WITH A CATALYST MUFFLER
Congratulations! You have made an investment toward protecting the environment. In order to
maintain this product’s original emission level, please refer to the maintenance section below.
* NOTICE: THE USE OF EMISSION CONTROL COMPONENTS OTHER THAN THOSE
DESIGNED FOR THIS UNIT IS A VIOLATION OF FEDERAL LAW.
30