Full Product Manual

SYMBOLS
SYMBOL
NAME DESIGNATION/EXPLANATION
V
Volts Voltage
A
Amperes Current
Hz
Hertz Frequency (cycles per second)
W
Watt Power
hrs
Hours Time
/min
Per Minute
Revolutions, strokes, surface speed, orbits etc., per
minute
n
o
No Load Speed Rational speed, at no load
Alternating Current Type of current
Direct Current Type or a characteristic of current
Lithium-Ion Battery
Recycling
Designates that this tool is in compliance with
Lithium-Ion battery recycling program requirements
Safety Alert
Read The Operator’s
Eye and Hearing
Protection
Manual
You must read the operating instructions carefully.
Always wear eye protection with side shields marked
to comply with ANSI Z87.1 along with hearing
protection when operating this equipment.
Precaution that involves your safety.
Gloves
Wear non-slip, heavy-duty protective gloves when
handling this product.
Safety Footwear
Wear non-slip safety footwear when using this
product.
Keep Bystanders Away Keep all bystanders at least 50' (15 m) away.
Ricochet
Thrown objects can ricochet and result in personal
injury or property damage.
No Blade
Do not install or use any type of blade on a product
displaying this symbol.
Gasoline and Lubricant
Use unleaded gasoline intended for motor vehicle use
with an octane rating of 87 [(R + M) / 2] or higher.
This product is powered by a 2-cycle engine and
requires pre-mixing gasoline and 2-cycle lubricant.
Some of the following symbols may be used on this product. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate
the product better and safer.
50ft (15m)
7