Parts List and Instalation Instructions

The LAZY MAN Model LM 210-28 is designed to be installed outdoors in a non-flammable type material such as
masonry, brick or steel. Our Stainless Steel Insulation Kit must be used for any wood installation.
• MINIMUM CLEARANCE TO COMBUSTIBLE SURFACES: 12” in all directions -
No overhead obstructions or structures. Clearances apply to all Mobile unites as well.
•
ROUGH IN DIMENSIONS: 12” High; 40 1/4” Left to Right; 21” Front to Back. Dimensions as stated are
“rough-ins”. It is always advised to take finished dimensions from unit.
•
GAS CONNECTION: Manifold is terminated with 1/2” F Elbow. Copper tubing or black pipe must be used to
supply gas from source. 1” Diameter holes are located in chassis for gas supply line. Mobile gas supply is
located at left rear.
•
FOR USE WITH PROPANE GAS: This unit will only operate on low pressure. A Low Pressure regulator must be
used in system using propane gas. (Low Pressure Regulator is included with Mobile units.)
•
REMEMBER! Any gas connection should be made by a QUALIFIED GAS SERVICE TECHNICIAN! Before
lighting, all connections must be tested for leaks with a soap solution. If bubbles occur, retighten
fittings and recheck.
•
NEVER attempt to light the barbecue with the weather cover in place or during use.
NEVER attempt to light the barbecue with Cooking Hood in closed position.
Installation Instructions
Cleaning Instructions
LAZY MAN, INC.
P. O.Box 327, 616 Hardwick St. • Belvidere, NJ 07823
800-475-1950 • 908-475-5315 • Fax: [phone]
www.LazyMan.com • e-mail: [e-mail]
The Model LM 210-28 is manufactured of the finest materials available. All stainless steel parts are made of Type 304 stain-
less.
YOU MUST REMEMBER - open flame cooking causes a great deal of splatter and this splatter will bake on surfaces
as the heat from cooking spreads to all surfaces. Unlike oven or top burner cooking, the meat is not in an object such as
a pot or pan and grease laden smoke will real all surfaces, inside and out. Thus more cleaning will be necessary to keep
the stainless as bright as when new. Stainless Steel resists the effects of use and weather despite surface appearance and
will give years of service.
The Stainless Steel grates can be brushed with a good quality brass bristle grill brush, placed in the dish washer or self
cleaning oven. Grates will discolor with use and this is normal.
All Stainless Steel surfaces can be cleaned with cleanser, non-abrasive scouring pads, oven cleaner or special stainless
steel cleaner available in hardware stores.