leakSMART® PRO Valve Complete Home Water Protection leakSMART® is an innovative, wireless system that eliminates the threat of water damage by keeping you in constant control of your home’s water supply. It not only detects leaks in your home, but also immediately shuts off the water, stopping damage before it can start — all in less than 10 seconds (Smart system hub required).
leakSMART® PRO TABLE OF CONTENTS • Homeowner Setup and Operation � Valve ...................................................... 5 � Manual Operation Steps ...................... 8 � Professional Installation Steps ............ 9-10 • Troubleshooting � Valve ......................................................
leakSMART® Package Contents It’s never been easier to stay in control of your home’s water supply. Setting up your leakSMART® system is as simple as launching an app, pairing with your smart home system and getting your leakSMART® Valve installed. Unpack your leakSMART® box and check the contents. You should have the following: Package Includes: Tools Required: (1) Phillips Head Screwdriver (1) leakSMART® Valve (1) 9V Power supply for the leakSMART® Valve (1 with 18 ft.
leakSMART® PRO Valve Setup and Operation 1. Download leakSMART® app via google play store (Android) or iTunes (IOS). Pair your leakSMART® valve with your smart home system (Smart hub required) • Place your leakSMART® Valve near your installation location, so you can verify that it is within range of your smart home leakSMART™ Hub. Verification will be done in pairing mode in APP.
leakSMART® PRO Valve Setup and Operation • Once the hub is in paring mode, press the center button once quickly on the valve controller. Check app for the valve to show up. Note: that it may take up to a minute for the valve to populate in the app. • All leakSMART® Valve Lights should turn off once pairing mode has been successfully completed. � A new valve on your home screen will verify the valve has been added. • leakSMART® App, should register ‘New Valve’ on the home screen.
leakSMART® PRO Valve Setup and Operation 2. Be protected, (Sensors required) • A leakSMART® sensor provides an audible water detection alarm, even without connection to your leakSMART® Hub — but pairing a sensor means the system will signal your leakSMART® Valve to automatically shut off your water and send you instant notifications, preventing water damage within 10 seconds. • To completely protect yourself from water damage, pair each leakSMART® sensor with your smart home system.
leakSMART® PRO Manual Operation Steps Manual Operation of your leakSMART® Valve: In the event of repeated error messages from your smart home system that the valve is not automatically opening and closing, the valve may be manually opened or closed. 1. Unplug the AC power cord from the valve cover. 2. Remove the cover from the valve. 3.
leakSMART® Professional Installation Steps The leakSMART® Valve is a patent-pending, wireless, motorized brass water ball valve that connects directly to a home’s main water supply. Professional installation is strongly recommended to ensure proper operation and reliable water damage prevention.
leakSMART® PRO Professional Installation Water Flow The valve will also need to reach an AC power source. It is recommended that the valve is kept operating on AC power (cord provided), with batteries used as a back-up power source. IMPORTANT: The valve must be installed after the water main manual shut-off and water meter. It is recommended that the valve be installed at least 8 inches away from water shut-off to avoid damage. Additional fittings may be required.
leakSMART® PRO Troubleshooting Your leakSMART® Valve works with your smart home system to keep you in control of your home’s water supply. The valve, which operates on AC power with battery back-up, will close automatically when paired with leakSMART® Hub and Sensors. Monitor your smart home system through your mobile device and detect a leak. The leakSMART® Hub will send a signal to your personal smart device providing you with more control and protection for your home.
leakSMART® PRO Troubleshooting Problem What to Check Status lights do not come on No water comes out of the faucet • Make sure there is power to the outlet • Unplug AC power adapter cord from valve cover and plug back in • If AC adapter extension wire was used, unplug both ends and reconnect • Replace batteries • Check that your leakSMART™ Valve is open by pressing the "Open" button on your Valve • Make sure the main water supply valve is open • Replace batteries • Make sure valve cover or valve control
leakSMART® PRO Device Reset Procedures • To reset the valve controller, rapidly press the center button 5 times. The Blue LED light will begin to flash indicating it is reset and ready to join the system. Note 1: Sometimes the device may require that it be power cycled in advance. This is done by removing the AC adapter cord connector and also removing a battery if any are installed. Then power back up and procced by pressing the center button 5 times rapidly.
leakSMART® PRO Device Reset Procedures 1. Sector Gear (Manual Operation) Manual operation: Accessing the sector gear, allows for manual operation of the valve. The sector gear is installed directly to the valve stem. Maintain position of the sector gear if removing, flipping the sector gear upside down reverses operation.