User Manual

6
• Once the hub is in paring mode, press the center button once quickly on the valve
controller. Check app for the valve to show up. Note: that it may take up to a
minute for the valve to populate in the app.
• All leakSMART
®
Valve Lights should turn off once pairing mode has been
successfully completed.
 A new valve on your home screen will verify the valve has been added.
• leakSMART
®
App, should register ‘New Valve’ on the home screen.
 Note: You can manually open/close the leakSMART
®
Valve by pressing the
‘Open’ and ‘Close’ buttons located on the front of the valve Or use the toggle
button to remotely open and close the valve in the app.
• It is recommended to test the valve by opening and closing using both, the local
control buttons on the valve and in the app, prior to installation.
• Once communication has been tested between hub and valve, you will then be
ready to plumb in the valve.
 Professional Installation Recommended. Contact a licensed plumber for
professional installation of your leakSMART
®
Valve.
• For fast, easy installation, provide your plumber with the details on pages 9-10
leakSMART
®
PRO
Valve Setup and Operation