User guide

Fridge
Freezer
door door
3
R..2'nukt
i
c
.
l
a
Rwo
,
v
ri
c
a
l
i
5
Reversing The Door
9
Reversible door
The door may be reversed in order to make installation
more convenient.
We recommend that two people reverse the door, as the
appliance requires supporting whilst being tipped. Take
care when fitting and tightening screws.
• Remove the cover (1) and the top hinge (2)
• Lift the top door upwards to disengage it from the
middle hinge. Put the door to one side, laying it care-
fully down on a padded surface.
•
Using a screwdriver, dismantle the middle hinge. Lift
the freezer door upwards to disengage it from the
lower hinge. Put the door to one side, laying it care-
fully down on a padded surface.
• Swap over the position of the lower hinge and the
adjustable leg to the other side of the cabinet.
•
Remove the hinge pin that is in the bottom of the
fridge and freezer door. On the other side of the
fridge and freezer door, insert the replacement hinge
pin that is supplied with the appliance.
• Place the freezer door on the lower hinge, making sure
that the hinge pin is inserted into the hole in the bot-
tom of the freezer door. Put the middle hinge back on
the cabient, making sure that it is on the opposite side
from its original position.
• Place the fridge door on the middle hinge, amking sure
that the hinge pin is inserted into the hole in the bot-
tom of the fridge door. Shut the door and then
replace the top hinge. Ensure that the top hinge pin is
inserted in the hole at the top of the fridge door.
Replace the covers.
Changing the bulb
•
Pull the lamp forwards to gain access to the lamp
holder. Unscrew the light bulb in an anti clockwise
direction by the holder. Replace the bulb with one of
the correct size and type (15 watt, SES E14 base).
Replace the lamp cover by pushing the cover back-
wards along the grooves. Reconnect the appliance to
the electricity supply.