Installation Guide

Remove and discard your existing electrical outlet plate.
Replace the old plate with the LectraLock® unit, being sure to use the screw(s) provided.
TO OPERATE:
1. To close: Insert the double-tabbed side of the cover into the slots on the baseplate. Press
the notched area on the opposite side of the cover inward until the latching tab snaps into
place.
2. To open: Using a flat screwdriver, gently pry inward and outward on the notched area of
the cover to disengage the latching tab and swing the cover outward.
IMPORTANT NOTES FOR CHILD SAFETY AND PROPER PRODUCT USE: Every
effort has been made to make the LectraLock Electrical Outlet Protector as tamper-resistant as
possible. However, this product is not intended to replace adult supervision.
Please install unit with screw(s) provided. THIS DEVICE IS INTENDED FOR INDOOR
USE ONLY.