User's Manual

HHa
LECTROSONICS, INC.
16
Specifications
Operating frequencies:
Band A1: 470.100 - 537.575
Band B1: 537.600 - 614.375
Band C1: 614.400 - 691.175
Band D1: 691.200 - 767.975 (export only)
Channel Step Size:
Normal Tuning mode: 100 kHz
Fine Tuning mode: 25 kHz
RF Power output: Selectable at 50 or 100 mW
Pilot tone: 25 to 32 kHz frequency; 5 kHz deviation
(Hybrid, IFB, 200 Series, Mode 6)
Frequency stability: ± 0.002%
Deviation: ± 75 kHz max. (Digital Hybrid mode)
Spurious radiation: 90 dB below carrier
Operating temperature range: -20° C to +50° C
Input compressor: Dual envelope compressor, >30 dB range
Audio Gain range: 0 to 45 dB; menu selectable
Modulation indicators: Dual bicolor LEDs indicate modulation
of -20, -10, 0 and +10 dB referenced to full
modulation, LCD bar-graph indicator
Frequency response 40 Hz to 20 kHz (+/- 1dB)
Low frequency roll-off: -3 dB selectable @35, 50, 70, 100, 125 Hz,
36 dB/octave (varies slightly w/ selection)
Controls:
External: Programmable mute/talkback button
Internal control panel: Power, Side Button Setup, MENU/SEL, BACK
and Up/Down arrow buttons for menu item
selection and settings.
Battery: (2) AA with polarity protection and
battery ejection lever
Battery Life: 5.5 hours (alkaline); 8-10 hours (lithium)
Battery Status Indication: Transmitted to Lectrosonics Digital Hybrid and
200 Series receivers
Capsule Interface: 1.25 in. diameter x 28 thread pitch
Capsule Power available: 5V, 25 mA max
Input impedance: 1000 Ohms
Weight: 11.4 oz. with lithium batteries and HHC
capsule
Dimensions: 9.5” long x 1.97” diameter at largest point with
HHC capsule attached
Emission Designator:
180KF3E
Specifications subject to change without notice.
Not all frequency blocks are available in all countries. Consult your local
representative or contact Lectrosonics for more information.