Brochure

1-800-752-2082

www.legendvalve.com

1. Zinc Plated Corrosion

Resistant Handle & Nut

2. Forged Brass Packing Nut

3. PTFE Stem Packing

4. EPDM O-ring

5. Forged Brass End Adapter

6. Forged Brass Body

7. Forged Brass Stem

8. Forged Brass Chrome

Plated Ball

9. PTFE Seats

FULL PORT BALL VALVES

T/S-2000 Ball Valve

The 2000 series ball valve have both a PTFE packing gland with nut and an EPDM O-ring seal stem design. The full port ball valve body, end

adaptor and chrome plated ball are constructed of forged brass. The stem is bottom loaded, thus blow-out proof. The EPDM O-ring stem

and PTFE seats reduce friction when actuating the valve making it easier to turn. The vinyl covered, zinc plated steel handle and nut resists

corrosion. The 2000 series ball valves have a large pattern body for tremendous durability in various residential, commercial and industrial

applications. The 2000 Series valve design is offered in a several conﬁgurations and brass alloys for a wide range of uses in potable water and

gas systems. Every valve is pressure tested at the ISO certiﬁed manufacturing facility. The T/S-2000NL valve in sizes 1/4”- 1” have a no lead

forged brass ball; whereas, valve sizes 1-1/4”- 4” have a 304 stainless steel ball.

• Saturated Steam (WSP): 150 PSI

• Cold Working Pressure (CWP): 600 PSI (1/4”- 2”); 400 PSI (2-1/2”- 4”).

• Conforms to MSS Standard Practice 110.

• Threaded end connections comply with ANSI/ASME B1.20.1

• Solder end connections comply with ANSI/ASME B16.18