Brochure

1-800-752-2082
www.legendvalve.com
11
T/S-2000NL No Lead Forged Brass Full Port Ball Valve
T/S-2000 Forged Brass Full Port Ball Valve
The T/S-2000NL no lead brass full port ball valve has a larger pattern body
suitable for most any application. Constructed of no lead & DZR binary brass alloy.
Available in sizes and configurations 1/4”- 4”, FNPT x FNPT and 1/2”- 4”, Sweat x
Sweat.
T/S-2102NL no lead brass full port ball valve with drain is ideal for maintenance
and freeze protection. The EPDM O-ring and PTFE packing gland stem assures
reliable and smoother operation requiring less torque. Constructed of no lead &
DZR binary brass alloy. 1/2”- 1”, FNPT x FNPT and 1/2”- 1”, Sweat x Sweat.
The T/S-2001NL is a smaller pattern full port ball valve designed exclusively for
potable water applications in compliance with the no lead law. Constructed of
no lead & DZR binary brass alloy that requires no additional steps to solder as
compared to traditional brass. Available in sizes and configurations 1/2”- 2”, FNPT
x FNPT and 1/2”- 2”, Sweat x Sweat.
The T/S-2000 full port ball valve has a larger pattern body suitable for most any application.
The EPDM O-ring and PTFE packing gland stem assures reliable and smoother operation
requiring less torque to operate. The PTFE seats reduce friction thus improving the long life
of the valve. The ball is chrome plated brass. The nickel plated handle is corrosion resistant.
Available in sizes and configurations 1/4”- 4”, FNPT x FNPT and 1/2”- 4”, Sweat x Sweat.
T/S-2102NL No Lead Forged Brass Full Port Ball Valve with Drain
T/S-2001NL No Lead Forged Brass Waterball™ Full Port Ball Valve
• T-2000 CSA Certied for use with natural, manufactured, mixed, liquid petroleum,
and LP gas/air mixtures: 1/2 lb (1/2”- 2”); 2 lb and 5 lb (1/4”, 1/2”- 4”).
• T-2000 UL Listed 3LZW for LP, natural and manufactured gases; to 250 PSI maximum.
• Factory Mutual approved for re protection service (1/4”- 2” FNPT x FNPT & 1/2”- 2”
Sweat x Sweat).
• Third party certied no lead ANSI/ NSF 61-G, UPC/IAPMO
• T-2000NL CSA Certied for use with natural, manufactured, mixed, liquid petroleum, and
LP gas/air mixtures: 1/2 lb (1/2”- 3”); 2 lb and 5 lb (1/4”, 1/2”- 2”).
• T-2000NL ANSI/ASME B16.33 for use in gas piping systems up to 125 psig (1/2”- 2”).
• T-2000NL UL Listed 3LZW for LP, natural and manufactured gases; to 250 PSI maximum.
• F actory Mutual approved for re protection service (1/4”- 2” FNPT x FNPT & 1/2”- 2”
Sweat x Sweat).
• Third party certied no lead ANSI/NSF 61-G, UPC/IAPMO.
• Saturated Steam (WSP): not suitable for steam applications.
• Cold Working Pressure (CWP): 600 PSI.
• Third party certied no lead ANSI/NSF 61-G, UPC/IAPMO.
• Saturated Steam (WSP): not suitable for steam applications.
• Cold Working Pressure (CWP): 600 PSI.